Pellet stoves

15000 series Plus

  • The 15000 series Nominal thermal output 14,5 kW. Wood pellet stoves for water heating.

    PATENTED BURN-POT Environment-friendly wood pellet stove constructed from thick sheet-steel with heat resistant paint. The steel firebox with cast-iron burn pot is equipped with a "flame distributorcatalyzer" in Keramfire®, which allows a cleaner and brighter combustion (device and functioning system protected under patent). The 750°C thermal shock resistant ceramic glass door makes the firebox totally air-tight. The zincplated steel fuel hopper has a 55 kg capacity. The electronic card with microprocessor switches on and shuts off the stove, feeds pellets, draws the exhaust gases, operates the water circulating pump and detects problems. The stove is supplied complete with control module with time-and-heat regulator for shortand long-term programming. Flueing is to the rear. The unit is to be installed in a hydraulic circuit with closed expansion tank.
  • nominalminimum
    Thermal Output14,54,3kW
    Heat output transferred to room air3,51,35kW
    Heat output transferred to water11,03,0kW
    CO emission at 13% oxygen0,0160,033%
    Efficiency94,595,5%
    Max. allowable water pressure during operation2bar
    Safety valve3bar
    Max delivery temperature85°C
    Nominal electrical power430W
    Nominal voltage230V
    Nominal frequency50Hz
    Fuelwood pellet
    Fuel consumption per hour3,000,88kg/h
    Total capacity of fuel gases11,565,95g/s
    Fuel gas temperature99,058,0°C
    Fuel draught pressure11,011,0Pa
    Expansion tankclosed
    Boiler capacity42l
    Connections1-3/4"
    Receptacle capacity50kg
    Burn time1756h
    Operating power required150W
    Fuel gases outlet⌀ 100W
    Combustion air intake36x36mm
    Weight of the structure including packaging237mm
    Weight of the claddings kit including packaging281kg

    15000_spacc

  • Pellet Plus 15000

    15000-gp.zoom

    Pellet Plus 15100

    15100.zoom

    Pellet Plus 15400

    15400-gr.zoom

  • 15000_sch_09-2009

  • art15aBVG

    15a B-VG: this is Article 15a from the local enrvironment provisions of the Styria district applying to independent domestic wood-burning appliances.

    It is a regulation defined by the Styria district government aiming to optimize the energy conservation and it was recognized by the Austrian government and came into force at a national level in July 1998 as the Austrian federal standard.

    The requirements that an appliance has to meet are the most stringent in all Europe with extremely low emission rates of pollutants, including CO, Nox, hydrocarbons and dusts, and a compulsory minimum heat output of 78%.

    CE

    European standards conformity mark.

    EN14785

    European reference standard for pellet stoves

    LRV

    Technical order against air pollution (OIAt) – Switzerland.

    ico_VKF-1

    VKF is the fire protection Swiss agency, accredited by the Confederation for certification of products and personal skills in the fire protection sector according to EN 45 011 and 45 013. This “Association of the cantonal fire protection authorities gathers 19 Swiss fire insurance companies in charge of coordinating and harmonizing the fire protection requirements at a national level and of conforming them to the demands of the UE provisions of law. The agency is also involved in defining general technical standardization requirements regarding heating appliances and their safety of operation. The products that fulfil the safety technical requirements established by this control body are granted a fire certificate without which the installation of any kind of fireplace or stove would not be permitted throughout Swiss.